Cardinal 3D 20L
100 in stock
Cardinal 3D is a high solids, long wearing floor polish incorporating new technology. Because the film is very hard it requires high speed buffing at 500 rpm using a buffing pad.
If swallowed give a glass of water and consult a doctor. If skin contact occurs, remove contaminated clothing and wash skin thoroughly, If in eyes, hold open, flood with water and see a doctor.
DIRECTIONS FOR USE
Clean the floor thoroughly. Apply 1 or 2 coats of Cardinal 3D (i50) with a lambswool polish applicator or damp mop. Allow 30 minutes drying time between coats. For good film formation without powdering the room temperature should be above 120C.
Not Classsified As a Dangerousd.
RECOMMENDED USAGE RATE
1 Litre per 40 square metres
IDEAL FOR USES:
Metallised, Water-based floor polish for Vinyl, Lino, Rubber & Wooden floors.
|Dimensions||28 × 25.5 × 38 cm|